Home > Parts and Accessories >

Upgrade Kit 2012
Upgrade Kit 2012 R718 *Buy rEvo Rebreathers at OceanEdge Outfitters 908-359-5468


 
Alternative Views:


List Price: $71.00

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: REVO-R718
Qty:

Description
 
The 2012 upgrade kit contains 4 new items that are standard on all rebreathers supplied starting January 1st 2012..
Features
1.The rEvo checklist: the use of a check lists during your rEvo courses was already required for some time now. To make your checks even easier, we produced a double sided laser engraved checklist. One side contains the ‘closed check’ and the other side contains the ‘pre-jump check’ Details on the content of the checklist can be downloaded from the website. The checklist comes with a bolt-snap, so it can stay together with your unit.

rEvo Check List




2 ‘TOP marker’ To assure that divers don’t make errors when exchanging scrubbers, a marker is added on top of the canister on the exhale lung, indicating that that canister is placed on ‘TOP’ position in the rebreather When after a dive, you want to exchange one scrubber, (cycle), follow exactly this procedure: If you make it a habit to immediately empty a canister when you have removed the ‘TOPMARKER’, you will not make a mistake when exchanging/filling/replacing canisters. So:
  • Take the top canister, with the ‘TOP-MARKER’ out of your rebreather
  • Unscrew the ‘TOP-MARKER’ from the canister and immediately empty that canister. (you are now sure you emptied the exhausted canister)
  • Screw the ‘TOP-MARKER’ on the remaining (full) canister, and either put that canister in the upper position of the unit, or if you are finished diving, in a sealed container or plastic bag.
  • Fill up the empty canister, and put it in the lower position of the rebreather, or in a sealed container if you finished diving 5 –Fill in your log that you refilled the bottom canister with fresh sorb


Top Scrubber Marker
Top Scrubber Marker Installed


3
Injection molded sensor tray The new injection molded sensor tray allows fitting and removing of 5 sensors without unclipping any part: installing of a sensor is now simply fitting the screw on the sensor, and pushing it onto the tray. The new tray also allows fitting of all rMS components.


Injection Molded Sensor Tray


4 Canister mesh with rubber molded edge Was designed to avoid metal wires sticking out of the side of the canister mesh, and to make filling/tapping of the canisters easier, a triangle-shaped rubber edge is molded on the mesh that closes of the top of each canister.


Canister Mesh with rubber molded edge


This upgrade kit is 30% less then buying all items individually!

Upgrade Kit 2012 is a great deal!


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Parts and Accessories
Parts and Accessories > rEvo Electronics
Parts and Accessories > rEvo Scrubber