Home > Products >

TiZIP Masterseal 91cm 36in
TiZIP Masterseal 91cm 36in


 
List Price: $117.95

Product Code: TI-9136
Qty:

Description
 
Features
The Technical Principle:
The TIZIP MasterSeal 10 is made from high-strength fabric coated with thermoplastic polyurethane. The extra strong plastic teeth are fixed on the top and bottom of the zipper tape. The zipper’s coupling elements keep the sealing edges tightly sealed together when the zipper is closed. The zipper tape can be both welded and glued.

The TIZIP MasterSeal 10 slider is made from a metal compound which is non-skin-irritating and salt water resistant. The slider movement is contact free and does not wear on the zipper tape or the sealing edge.

Operating force: Opening and closing the TIZIP MasterSeal 10 requires moderate pulling force on the slider. Please allow a slightly higher pulling force to undock the both ends closed version. Some lubrication can help to reduce the pulling force on the docking end. The chain is maintenance free.

Stability: The TIZIP MasterSeal 10’s performance in terms of strength and durability is very good. However, sharp bending or twisting should be avoided. When closed, the TIZIP MasterSeal 10 has a cross breaking strength of minimum 200 N/cm.

Storage and transportation: For storage, long- and short term and during transportation we recommend to leave the zipper chain closed. The closed chain protects the sealing lips from dirt and damage. High humidity and temperatures over room temperature must be avoided!

Lubrication: Both ends closed TIZIP MasterSeal 10 zippers need to be lubricated on the docking end from time to time. Please use the original TIZIP lubricant or other available zipper lubricants. Carefully apply over the docking end surfaces on front, back and inside where they connect to the zipper chain. Repeat before long term storage leaving the slider closed and whenever the area is dry during use.

Testing: The sealing function of the TIZIP MasterSeal 10 is tested by fastening the zipper in a straight rectangular frame, 3cm wide, face down. Compressed air is applied to the front side of the zipper and water poured over the back until it is submersed. To pass the test no air bubbles may occur for a period of 20 seconds. Random testing is performed during the production of every batch.

Cleaning: The TIZIP MasterSeal 10 is highly resistant to damage caused by dirt or sand. However if dirt or sand are present, the zipper should be cleaned with soap and water. Dirt particles can affect the sealing function if they get caught between the chain profiles. If the TIZIP MasterSeal 10 closure is used to protect life or sensitive material, the sealing function and cleanliness of the chain area should be thoroughly checked prior to every usage.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Products
Parts